Two Phase Stepping Driver for Small and Medium Equipment
|FOB Price:||US $84-115 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $84-115/ Piece|
|Production Capacity:||1000000 PCS/Year|
|Payment Terms:||L/C, T/T, Western Union, VISA|
- Model NO.: 7022SA
- Structure: Open-Loop
- Signal: Continuous
- Certification: RoHS, ISO: 9001, CE
- Customized: Customized
- Name: Stepping Driver for Small and Medium Equipment
- Transport Package: Green Export Package
- Origin: China
- Task: Adjust
- Mathematical Model: Linear
- Function: Automatic Control
- Condition: New
- Material: Stainless Steel
- Trademark: Novotech
- Specification: CE, ISO9001, RoHS
- HS Code: 8503009090
Note : All above is normally used, and we can customize according to your request or choose the suitable model for you.
1.Operating voltage: AC85 to 265VAC, advice 110VAC or 220VAC,the max output peak current is 7.0A
2.Using flux linkage anti-resonance algorithm and electronic damping low-speed anti-vibration algorithm,the driver and motor have low temperature
3.Pulse, direction compatible with enable signal interface level 4.5-28Vdc , no external current limiting resistor
4.Automatic identify of motor parameters and automatic adjustment of control parameters when power on
5.Built-in micro-step subdivision algorithm to achieve low-subdivision control instructions, high-subdivision operation results,good stability
6.Using high pressure and low voltage isolation program inside,the reliability is very high
7.Automatic identify of motor parameters and automatic adjustment of control parameters when power on
8.Control mode: pulse / direction mode or dual pulse input mode
9.The max pulse frequency of the control command is 200KHz
10.Provide 16 positions of conventional micro-step subdivision set value,The highest resolution is 40000
Novotech driver used in marking machine, cutting machine, laser phototypesetting, plotter, transmission power lines, automatic assembly and other equipments. It suitable for a lot of small and medium-sized automation equipments and instruments, has outstanding performance in the equipments that users expect small noise and high-speed.
|Output peak current(A)||Output RMS current(A)||SW1||SW2||SW3|
Half And Full Current Set SW4(idle)
If the driver does not receive the pulse command after 200ms, then it enters the idle mode, SW4 can set the current.
|Current percentage as idle state||SW4 mode|
Packaging and shipping
1.Outer packing: Standard export carton with required shipping marks
2.Inner packing: Waterproof packing with shock absorbing EPE and cardboard surrounded
3.As per the clients requirements
1.Working time : 8:00 a.m - 10:00 p.m .Any questions, please tell us freely, we will be reply you asap.
2.Lead time : For samples, 2 to 5 days will be OK. For mass production, the lead time depend on the quantities you need.
3.Warrantity period : 18 months and Life-long maintenance service for the product.
4.We accept products customize.
Q1: How to choose the suitable stepper driver?
A1: Please tell us your stepper motor's model, we will choose the suitable one according to motor's model.
Q2: Any other methods to finalize the model?
A2: Sure, you can send us the model you are using, we can help you find the suitable one.
Q3:How to guarantee the Quality of Industrial Parts?
A3: We have the integrated system for industrial parts quality control. We have IQC (incoming quality control), IPQCS (in process quality control section), FQC (final quality control) and OQC (out-going quality control) to control each process of industrial parts prodution.
Q4:What's the Advantage of Your Parts for Industry Products?
A4:1.The advantage of our products is the competitive prices, fast delivery and high quality. Our
employees are responsible-oriented, friendly-oriented,and diligent-oriented. Our products are featured by strict tolerance, smooth finish and long service time.
2.Before we send out the goods,we check them more than three times.