Synchronous Stepping Driver for Sub-Board Equipment

• Customization: Available
• Task: Adjust
• Structure: Open-Loop
• Model NO.: 5605S-IOD
• Mathematical Model: Linear
• Signal: Continuous
• Function: Automatic Control
• Certification: RoHS, ISO: 9001, CE
• Condition: New
• Customized: Customized
• Material: Stainless Steel
• Name: Synchronous Stepping Driver for Subboard Equipment
• Transport Package: Green Export Package
• Specification: CE, ISO9001, RoHS
• Trademark: Novotech
• Origin: China
• HS Code: 8503009090
• Production Capacity: 1000000 PCS/Year

Product Description

Synchronous Stepping Driver For Sub-board Equipment
This driver can drive two motors at the same time



Note : All above is normally used, and we can customize according to your request or choose the suitable model for you.

Character
1.Match 57 two-phase step series or below, synchronous drive two motors, their parameters do not need to be consistent                   
2.Interface is 3.8V-24Vdc,no need current limiting resistor
3.With fuction of over-current, over-voltage, under-current and undervoltage protection
4.32-bit dps technology
5.The speed and motor current can be adjusted by DIP
6.Can be connected to 10-20K potentiometer for speed adjustment

Application
Constant speed movement occasion, triggering start,stop or reverse, such as automatically assembly line, winding equipment, sub-board equipment, etc.Also suitable for the occasion of two motors synchronization

Fuction	Label	Definition		Remark
Power input terminal	V+	Enter the positive of DC power supply		DC power 24-48V
	V-	Enter the negative of DC power supply
Motor line terminal 1	A+	Connect the motor A-phase windings at both ends
	A-
	B+	Connect the motor B-phase windings at both ends
	B-
Motor line terminal 2	A+	Connect the motor A-phase windings at both ends
	A-
	B+	Connect the motor B-phase windings at both ends
	B-
Input terminal wiring	OPTO	input common terminal		3.3-24V  level compatible
	DIR	Forward and reverse input
	ENA-	Enable control interface
	+5V	Adjustable rheostat head end
Enable wiring	AIN	Adjustable rheostat middle tap
	GND	Adjustable rheostat tail

Packaging and shipping
1.Outer packing: Standard export carton with required shipping marks
2.Inner packing: Waterproof packing with shock absorbing EPE and cardboard surrounded 
3.As per the clients requirements

Our service
1.Working time : 8:00 a.m - 10:00 p.m .Any questions, please tell us freely, we will be reply you asap.
2.Lead time : For samples, 2 to 5 days will be OK. For mass production, the lead time depend on the quantities you need.
3.Warrantity period : 18 months and Life-long maintenance service for the product.
4.We accept products customize.

FAQ
Q1: How to choose the suitable stepper driver?
A1: Please tell us your stepper motor's model, we will choose the suitable one according to motor's model.

Q2: Any other methods to finalize the model?
A2: Sure, you can send us the model you are using, we can help you find the suitable one.

Q3:How to guarantee the Quality of Industrial Parts?
A3: We have the integrated system for industrial parts quality control. We have IQC (incoming quality control), IPQCS (in process quality control section), FQC (final quality control) and OQC (out-going quality control) to control each process of industrial parts prodution.

Q4:What's the Advantage of Your Parts for Industry Products? 
A4:1.The advantage of our products is the competitive prices, fast delivery and high quality. Our
employees are responsible-oriented, friendly-oriented,and diligent-oriented. Our products are featured by strict tolerance, smooth finish and long service time.
 2.Before we send out the goods,we check them more than three times.

Contact